Cyanine3 phosphoramidite
| 貨號 | 數量 | 價格 | 交貨時間 | 購買此產品 |
|---|---|---|---|---|
| 2771-100mg | 100 mg | – | 現貨 | |
| 2771-250mg | 250 mg | $290 | 現貨 | |
| 2771-1g | 1 g |
$950
|
現貨 | |
| 2771-10g | 10 g | 請查詢 | 現貨 |
Cyanine3 is a fluorophore that is widely used in molecular biology experiments such as oligonucleotide labeling followed by oligonucleotide detection. By its spectral characteristics, Cyanine3 is a dye with a fluorescence maximum at 570 nm in the yellow spectrum range.
Cyanine3 phosphoramidite 5’ is used in oligonucleotide synthesis for the production of 5’-cyanine3-labeled oligonucleotides. The reagent is compatible with various oligonucleotide synthesizers.
This phosphoramidite can be used for the synthesis of fluorescence-labeled primers and hybridization probes such as TaqMan and Molecular Beacon. Such labeled probes can be detected in multiplex real-time PCR in the TAMRA channel.
Usage:
Condensation: 3 min. Use 0.02 M iodine solution at the oxidation step to avoid degradation of the cyanine dye.
Deprotection: At room temperature with 30% aqueous ammonium solution. It is recommended to use nucleic bases with labile protective groups for deprotection for not more than 2 h at less than 55°C. AMA (30% aqueous ammonium solution/40% aqueous methylamine 1:1 (v/v)) can be used for 10 min at 65°C in the presence of acetyldeoxycytidine. If deoxyguanidine with a dimethylformamidine protective group is used during synthesis, deprotect with 30% aqueous ammonium solution for 2 h at 65°C. If deoxyguanidine with an isobutyryl protective group is used during synthesis, deprotect for 24-36 h at room temperature.
顧客還購買了這個產品
JOE azide, 5-isomer
JOE is a chlorinated fluorescein dye which is often used for HEX channel for oligonucleotides. It is less hydrophobic than HEX. This is an azide derivative for сlick chemistry六角疊氮化物, 6-異構體 (HEX azide, 6-isomer)
綠色-黃色發射 HEX 染料的疊氮化物，通過 [3+2]-偶極環加成與寡核苷酸偶合。DiA，親脂性示蹤劑 (DiA, lipophilic tracer)
用於膜標記和細胞示蹤的廣譜螢光親脂染料。General properties
| Appearance: | red powder |
| Molecular weight: | 841.81 |
| Molecular formula: | C45H65N5BF4O3P |
| Solubility: | good in acetonitrile, dichloromethane |
| Quality control: | NMR 1H, 31P, HPLC-MS (80%) |
| Storage conditions: | Storage: 12 months after receival at -20°C in the dark. Transportation: at room temperature for up to 3 weeks. Avoid prolonged exposure to light. Desiccate. |
| MSDS: | 下載 |
| 產品規格 |
Spectral properties
| Excitation/absorption maximum, nm: | 555 |
| ε, L⋅mol−1⋅cm−1: | 150000 |
| Emission maximum, nm: | 570 |
| Fluorescence quantum yield: | 0.31 |
| CF260: | 0.04 |
| CF280: | 0.09 |
Oligo synthesis details
| Diluent: | acetonitrile |
| Coupling conditions: | 6 min coupling time recommended |
| Deprotection conditions: | recommended 48 h at +4°C or ultramild protective groups; 24 h at rt possible |
您的購物車是空的
$ 
