此頁面上的某些內容不提供英文版本,將默認以當前可用的語言顯示。

ProteOrange Protein Quantification Kit

貨號 數量 價格 交貨時間
A4102
100 uL dye
–   1 天
14102
1 mL dye
$415 1 天
Found better price? Let us know and we will propose the way forward!

ProteOrange Kit with a fluorescent dye allows protein quantification with higher sensitivity than that of spectrophotometry and other conventional methods used for protein quantification (Lowry, Bradford, BCA).

ProteOrange reagent, the key kit ingredient, exhibits almost no fluorescence in the free form. In a solution it forms complexes with protein molecules and exhibits increased fluorescence upon binding to proteins. The excitation maximum of ProteOrange in the complex with protein is at ~485 nm, the emission maximum — at ~590 nm. The kit can be used with any fluorometer that has a suitable excitation source and detection channel. In general, the working range of measured protein concentration is limited by the equipment sensitivity. The recommended range of concentrations that can be measured is 10 ng/mL to 10 µg/mL for cuvette fluorometers and 100 ng/mL to 10 µg/mL for plate fluorometers.

The kit contains ProteOrange fluorescent dye, buffer for preparation of dye working solution, and protein concentration standard (BSA, 2 mg/mL). To quantify the test protein, prepare dye working solution and use it to dilute test samples and samples with known protein concentration to generate a calibration curve. Protein concentration standards are prepared using bovine serum albumin from the kit or (if available) experimental protein identical to that in the test samples. Incubate prepared samples for 10 min at 95 °C to denature proteins, allow them to cool down to room temperature and measure fluorescence intensity.

Depending on sample volume, the number of measurements varies from 200 (sample volume 2.5 mL and assay volume 2 mL for a standard fluorometric cuvette) to 2000 (sample volume 250 µL and assay volume 200 µL for a 96-well plate).

顧客還購買了這個產品

QuDye Protein Quantification Kit

Ready-to-use kit for simple, tolerant-to-contaminants protein quantification. The kit includes concentrated assay reagent, dilution buffer, and prediluted BSA standards.

ProteOrange Protein Quantification Reagent, 500×

ProteOrange is a fluorescent protein-sensitive dye used for quantitating purified protein samples. The dye shows minimal variability for different proteins. This reagent is a 500× concentrate of ProteOrange dye.

QuDye Protein Quantification Reagent, 200×

Highly sensitive and selective reagent for fluorometric quantification of protein concentration, using both fluorescence microplate readers and cuvette-based devices. The dye is highly tolerant to non-protein impurities, except surface acting agents.

储存条件:
MSDS: 下載

储存时间(月: 12
已添加您的物品. 查看您的 購物車繼續結賬
物品數量不正確.